Products Range

Metallised Polyester Film

Type Applications Form Factor Capacitance Range(μF) Volts(Vdc)
Instrumentation,Meter Damping, Communications,Filter bypass,R-C Circuit,Switching,input to high impedance circuit. MPE 0.001-22 63-1000
Automobile RFI Capacitors Automobile RFI Capacitors 0.5 – 3.3 100 – 250 Vdc

Metallised Polyphenylene Sulphide Film (PPS)

Type Applications Form Factor Capacitance Range(μF) Volts(Vdc)
In high ambient temperature applications,as a high stability replacement for metallised polycarbonate capacitors Special Value & High Voltage available on request PPS 0.047-10.0 63-250VDC
PPS

Metallised Polypropylene Film

Type Applications Form Factor Capacitance Range(μF) Volts(Vdc)
For interference suppression in across line applications—safety capacitors X2 0.01-1.0 250-275 Vac
For interference suppression between line and ground applications Y2 0.001-0.047 250-275 Vac
For interference suppression between line and ground applications X2 440vac 0.022 - 1.0 440 Vac
For energy conversion and used to suppress or attenuate high voltage peaks Axial Snubber 0.1 - 2.0 850 - 3000 Vdc
For high Frequency Application, Precision Capacitors, Close Tolerance +/-1%,Timing, LC Filter Axial PA General 0.00047-10 63-1000 Vdc
For high quality Audiophile products such as power amplifiers and loudspeaker crossovers CDI 0.1µF to 330µF 250-630Vdc
For Precision Capacitors, Close Tolerance +/-1%, Timing, LC Filter Box Tower Block PA 400pf to 412nf 63vdc/40vac
To support a DC network by supplying periodic high currents in X-ray & CT-scan machines,,AC & DC drives DC Link 10-500 400 to 2000Vdc
In electric motors (Start/Run), fan motors,lighting,LC filtering of harmonics,UPS,etc. AC 1µF to 200µF 250Vac to 1000Vac
250Vdc to 2000Vdc
In resonant tank circuits Resonant 3µF to 85µF Voltage rating : upto 1000Vrms
Current rating : upto 1400Vrms
For energy storage and filtering High Voltage 0.01-10 600-40000 Vdc
For power factor correction Kvar 5kvar & 10kvar 440 Vac

IGBT Snubber Modules

Type Applications Form Factor Capacitance Range(μF) Volts(Vdc)
In snubber circuits IGBT Snubber 0.01µF- 4µF 600-3000Vdc

Feedthrough Capacitors

Type Applications Form Factor Capacitance Range(μF) Volts(Vdc)
Eliminate or reduce unwanted RFI noise from entering or leaving the equipment Feed Through

0.1mfd to 10mfd

5amps to 400amps

63-400 Vdc

EMI Noise Filters

Type Applications Form Factor Current range Voltage ratings
To eliminate or reduce unwanted RFI noise from entering or leaving the equipment EMI-RFI-Filter 1A to 400A 250Vac 440Vac
Single and Three Phase

Metallised Polyester Film Capacitors (Specifications)

Type Style Capacity Range Voltage Range Group
MWF Axial Round 0.0022 to 10.0 μF ± 5% and 10% 63-630 Vdc Moderate cost, General use
MWF Axial Round 0.001 to 10.0 μF ± 5% 10% 63-1000 VDC 35-300 VAC General use, Moderate cost
MWOF Axial Oval 0.47 to 10.0 μF ±, 5% 10% 100-1000 VDC Reduced Height on PCB
MF Radial 0.001 to 10.0 μF ± 5% 10% 63-1000 VDC 10.2 to 27.5 pitch
MMF Radial 0.001-0.47 μF ± 5% 10% 100-630 VDC Miniature 7.5mm pitch

Metallised Polycarbonate Capacitors (Specifications)

Type Style Capacity Range Voltage Range Group
CMWF Axial Round 0.0022 to 10.0 μF ± 1% 5% and 10% 63-630 Vdc Close tolerance, Higher cost
CMWOF Axial Oval 0.47 to 10.0 μF ± 1% 5% and 10% 63-630 Vdc Higher temperature class, Low ppm
CMF Radial 0.0022 to 10.0 μF ± 1% 5% and 10% 63-630 Vdc 10.2 to 27.5 pitch

Metallised Polypropylene Capacitors (Specifications)

Type Style Capacity Range Voltage Range Group
DC Voltages
Type-PMWF Axial Round 0.0022 to 10.0 μF ±, 1% 5% and 10% 100-630Vdc Close tolerance, Moderate cost
Type-PMF Radial 0.0022 to 10.0 μF ± 1% 5% and 10% 63-630 Vdc 100 deg C max, Negative ppm
AC Voltages
Type-MPP Axial/Radial 250/300 Vac 400/440Vac Across the line applications
Type-MKP4 Radial -do-
Type-MKP5 Axial -do-
Type-MKP6 Radial -do- Double Metallised
Type-MKP7 Axial -do- Double Metallised

Interference Suppression - X and Y Class

Type Style Capacity Range Voltage Range Group
PWX Axial Round 0.01-2.2 μF ± 10% 250-440 Vac RFI Filters
PMX Radial 0.01-1.0 μF ± 10% 250-440 Vac Noise suppression, X2 class
PMY Radial 0.001-0.01 μF ± 10% 250 Vac Noise suppression, Y2 class

Dielectric Selection Guide:

Application Polyester Polycarbonate Polypropylene Range Tantalum Al Electrolytic Mica Ceramic
Cap Range Axial Round 0.01 to 15 0.01 to 100 0.1 to 5000 0.5 to 100,000 10pf to 0.1 0.001 to 1
DC Volts upto Radial 1000 1500 300 700 5000 4000
AC Volts upto Radial 350 500 250 (inter) N/A 400
Tolerance 10 10 10 20 50 5 20
Standard Minimum 1 1 1 5 20 1 5
IR min Megohms 10,000 20,000 30,000 100,000 100,000
TanDelta@1KHz 0.006 0.003 0.0005 0.02 0.02
Stability Moderate Good Good Moderate Poor Excellent Moderate
Cost/ CV Moderate High Moderte High Low High Low
Temp Coeff

Note : All values are indicative only and may change from manufacturer to manufacturer. Refer to individual catalogues for specific values.

Application Guide

Application Polyester Polycarbonate Polypropylene Range Tantalum Al Electrolytic Mica Ceramic
Blocking DC Yes Yes Yes Yes Yes Yes Yes
Bypass Yes Yes Yes Yes Yes Yes Yes
Commutation Rarely Yes Yes Yes Yes
Coupling Yes Yes Yes
Tuning Yes Yes Yes
Power Factor Low Voltage Yes
Energy Storage Rare Yes
Timing Yes Yes Yes
dv/dt snubber Yes
Interference Suppression Yes Yes Yes

Note : All values are indicative only and may change from manufacturer to manufacturer. Refer to individual catalogues for specific values.

Advance Capacitors © 2019 | Powered by : GoogleRank.co.in