Tantalum Electrolytic Capacitors

Tantalum Electrolytic Capacitors

Product Specification

Cap Range 0.1 to 5000
DC Volts up to 300
Tolerance 20
Standard Minimum 5
Stability Moderate
Cost/ CV High

Tantalum electrolytic capacitors are made with a high level of capacitance that uses tantalum metal for the anode. These capacitors are polarized with high frequency and stability capabilities. The anode in tantalum capacitors is covered by oxide that acts as the dielectric and is surrounded by the cathode. This capacitors are normally smaller in size and widely used in surface mount formats.

Overview of Tantalum electrolytic capacitors

  • Tantalum capacitors are also polarized like aluminum electrolytic capacitors but have high withstanding power.
  • They are very small compared to electrolytic capacitors and much cheaper.
  • They use film of oxide on tantalum instead of using a film of oxide on aluminum.
  • With a higher operating temperature capability, they also consist a low ESR (equivalent series resistance)

Advantages of Tantalum electrolytic capacitors:

  • High Volumetric Capacitance
  • High Level of Capacitance
  • Reliable
  • Low Cost
  • Available in SMD Format
  • Wide Operating Temperature Capability

Advance Capacitors, one of the largest manufacturer of capacitors brings you these ideal capacitors that are widely used in the place where high capacitance with low current is required along with all the formats available in the industry.

Advance Capacitors © 2019 | Powered by : G-Rank | Digital Marketing Partner | SiteMap