Power AC Capacitors

AC/DC Power Capacitors in India

Extensive range of Capacitance and Voltage ratings in a large variety of cases, terminals and mountings make ADVANCE Metallised Polypropylene Capacitors ideally suitable for most AC applications. The Metallised electrodes allow self-healing in operation. The excellent electrical properties of the polypropylene film and ADVANCE construction techniques allow higher ionization inception voltage and a longer life. Non-inductively wound capacitor elements are housed in cases and sealed with epoxy resin, leading to a completely dry construction, eliminating damages due to leaky impregnates. This makes ADVANCE capacitors ideal for AC applications and as a replacement for paper capacitors.

Applications:

  • Motor Start/Run
  • Fluorescent Lighting
  • LC Filtering of Harmonics
  • Constant Voltage Supplies
  • Fan motors
  • Power Factor Correction
  • Ferro Resonant Supplies
  • Energy Storage
  • Air Conditioners
  • Power Electronics
  • UPS
  • Elements for Power Factor Capacitors

Standards :

  • IS 1569, 1976 - Capacitors for Fluorescent Lighting
  • IS 1709, 1960 - Capacitors for Fan Motors
  • IS 2993, 1975 - Capacitors for Motors
  • IS 2834, 1981 - Capacitors for Power Systems

Technical Specifications :

Capacitance 1µF to 1000µF
Rated Voltage 250Vac to 3000Vac / 400Vdc to 10000vdc
(Higher Capacitance and Higher Voltage available on request)
Tolerance ±5%, ±10%
Temperature Range -40 °C to +85 °C
Tan Delta <0.001 at 1 kHz
Insulation Resistance 10,000 Mohm*µF
Test Voltage As per IS standards
Climatic Category 40/85/56
Temperature Co-efficient -150 ppm/ °C

STYLES :

  • BP2 – 250Vac/300Vac - suitable for Fluorescent Lighting Applications
  • AP2 – 250Vac/300Vac - suitable for Higher RMS Current and Dielectric Strength Applications
  • BP4 – 415 / 440Vac – suitable for Fans, Motors, Air Conditioners etc.,
  • AP4 – 415 / 440Vac - suitable for Pulse, Higher RMS Current and Dielectric Strength Applications
  • AP5 – 500Vac – suitable Higher RMS Current and Dielectric Strength Applications
  • AP6 – 600Vac - suitable Higher RMS Current and Dielectric Strength Applications
  • AP8 - 800Vac - suitable Higher RMS Current and Dielectric Strength Applications

Note: P2/S2 Safety Capacitors Available on Request

Advance Capacitors © 2019 | Powered by : GoogleRank.co.in